Electric straight single-seat control valve
Electric straight single-seat control valve
Nominal diameter: DN50 ~ 300mm
Nominal pressure: PN2.5 ~ 6.4MPa
Operating temperature: ≤450 ℃
Main material: WCB, WC6,20CrMo
connection type: Welding
Design Standards: GB / T17213
inspection standards: GB / T4213
First, the working principle
T968Y electric intelligent control valve is composed of electric actuator and hydrophobic control valve of two parts. Electric
control valve input is sent to the regulator DC signal amplified by the
servo amplifier to drive the implementing agency, resulting in axial
thrust, driven by regulating valve action, causing changes in media flow
to regulate various parameters in the system. At
the same time, the actuator sends a valve position signal for servo
amplifier comparison, so that the control valve always remains in an
input signal corresponding position to complete the servo adjustment
task.
Third, the main technical parameters
| Nominal diameter DN (mm) | 50 | 80 | 100 | 150 | 200 | 250 | 300 |
| Flow characteristics | Approximate linear, approximate equal percentage | ||||||
| Nominal pressure PN (MPa) | 2.5 / 6.4 | ||||||
| Connection type | welding | ||||||
| Equipped with implementing agencies | ZKD type | ||||||
| Travel L (mm) | 57.6 | 88.2 | |||||
| The maximum pressure △ P (MPa) | 0.5 / 3 | ||||||
| Rated flow coefficient Cv | 44 | 99 | 175 | 395 | 640 | 1000 | 1440 |
| Working temperature (℃) | ≤450 | ≤450 | |||||
| Use media | water | ||||||
Note:
1, the model also has flange, right angle, and flange angle
2, also can be equipped with pneumatic actuator or HQ intelligent actuator
Fourth, the main technical performance indicators
| project | Technical performance indicators | ||||||
| Basic error (%) | Not more than ± 2.5 | ||||||
| Back to the difference (%) | ≤1.5 | ||||||
| dead zone(%) | ≤3 | ||||||
| Leakage | 0.01% × valve rated capacity | ||||||
Fifth, the main valve material
| name | material | ||||||
| Body | WCB, WC6, 20CrMo | ||||||
| Spool | 316 stainless steel | ||||||
| Shrouded | 17-4PH | ||||||
| Valve stem | 17-4PH | ||||||
| Seat | 316 stainless steel | ||||||
Six, size
| Nominal diameter DN (mm) | 50 | 80 | 100 | 150 | 200 | 250 | 300 |
| H (mm) | 860 | 918 | 918 | 918 | 1460 | 1690 | 1690 |
| H1 (mm) | 120 | 248 | 248 | 248 | 360 | 470 | 470 |
| L (mm) | 300 | 372 | 372 | 372 | 490 | 610 | 610 |
| D1 (mm) | 90 | 150 | 180 | 200 | 244 | 355 | 420 |
| D2 (mm) | 76 | 104 | 127 | 168 | 210 | 270 | 320 |
| D3 (mm) | 50 | 80 | 100 | 140 | 180 | 230 | 270 |
 |  Shandong Hugong Valve Manufacturing Co., Ltd.  91, Zhongnan High-tech Yuandu Huizhi Industrial Park, Taixiang Street and Wenhua Road, Weifang Economic Development Zone, Shandong +86-15963678999 [email protected] |  |
Copyright ? Shandong Hugong Valve Manufacturing Co., Ltd.
Record number: No. 18000630-1 Lu ICP
